Home / Products / Industrial Misting

Odor Control Spray System for Waste Stations

Atomised deodorant control for waste transfer and treatment facilities

A fixed atomising system for waste transfer stations, treatment plants, composting yards and recycling depots. Diluted deodorant is broken into fine droplets and released into the air above the working area.

Operation is normally cyclic and zoned, so the strongest odour sources — tipping halls, loading bays and bunkers — are treated more often than the rest of the site.

Specifications

Working pressure60–90 bar
Droplet size10–30 μm
Unit power1.5–5.5 kW
Deodorant dilution1:200–1:500 (concentrate : water)
Odor reductionammonia reduction ≥ 85%
Coverage area1,000–15,000 m²
Control modetimer / sensor-linked / remote
Spray modeautomatic spray (intermittent or continuous)
Consumablesdeodorant consumption 0.5–3 L/h (depending on site conditions)
Mountingwall, floor or vehicle mounted

Specifications are for the standard configuration. Final figures are confirmed in your quotation — tell us the application and we will size it for your site.

Odor Control Spray System for Waste Stations

Key points

  • Zoned cycles — Tipping hall, loading bay and perimeter treated separately.
  • Dilution dosing — Proportional dosing unit keeps consumption predictable.
  • Remote or automatic — Runs on schedule, or on sensor trigger for peak odour conditions.
  • Retrofit friendly — Nozzle lines install onto existing walls, columns and roof structure.
Applications

Where this system is used

Typical installations — your site may combine several.

Waste transfer stations

Landfill sites

Composting yards

Recycling depots

Livestock sheds

FAQ

Odor Control Spray System for Waste Stations — common questions

Written out in full so you can verify before you buy.

What pressure does a high-pressure misting system run at?

Typical working pressure is 70–100 bar for fine landscape fog (droplet size 1–15 μm) and 40–70 bar for outdoor mosquito control, where larger droplets are wanted so the repellent stays in the air longer.

How much area can one system cover?

One pump unit covers roughly 500–2,000 m² for cooling and landscape fog, and roughly 300–1,500 m² for mosquito control, depending on nozzle layout, pipe length and wind conditions. Send us a site plan and we will size it for you.

How much cooling can we expect?

Under dry, hot conditions a correctly sized system typically lowers the perceived temperature in the treated zone by about 5–10 °C (9–18 °F). We will confirm the expectation for your site before you order.

What water supply is required?

Municipal tap water is normally suitable. We recommend an inlet filter (and softener where water is hard) to protect nozzles. Flow requirement depends on nozzle count — we calculate it in the proposal.

Related equipment

Often specified together

Smart High-Pressure Misting System
Misting Systems

Smart High-Pressure Misting System

Landscape fog, cooling, humidification and air purification in one system

View details
Garden Mosquito Misting System
Mosquito Control

Garden Mosquito Misting System

Automated outdoor mosquito control for gardens and outdoor dining

View details
Related reading

Guides for this equipment

Costs, sizing, installation and maintenance — written by the people who build the system.

Request a quotation

Quotation for Odor Control Spray System for Waste Stations

Send us the area, the application and your country. You will get a written quotation — pump unit, nozzle count, controls and spare parts listed separately.

Replies within one working day (GMT+8). Your details are only used to answer this enquiry.
Thank you — your enquiry has been received. Our engineer will reply to you within one working day.
Email Quote