Steam humidification is energy-hungry and adds heat the crop may not want. Sprinklers wet the beds and the crop surface. High-pressure fogging at 1–15 μm raises humidity evenly through the room without touching the beds — which is also why it can be combined with cooling in the same room.
Mushroom houses almost always run several rooms at different stages, and each stage wants different humidity.
Room dimensions and count, current humidity readings, water source (bore hole water often needs filtration), power supply and whether cooling is also wanted. The quotation states nozzle count per room, zoning, pump size, filtration and the expected consumption (published 3–8 L/min).
| Droplet size | 1–15 μm |
|---|---|
| Working pressure | 70–100 bar |
| Coverage | 500–10,000 m² per system |
| Water consumption | 3–8 L/min |
| Control | humidity-linked, separate zones per room |
Figures are our published specification ranges (or general market conditions where stated). Final configuration is confirmed per project in the written quotation.
Send the area, the application and your destination port — itemised written quotation within one working day, no price list required.
Request a quotation Size my systemYes, with solenoid zoning — each room is controlled independently and only the rooms that need misting draw water. This is the usual configuration on commercial farms.
Often, with filtration. Mineral content and iron in particular will block fine nozzles, so we specify the inlet filtration and a cleaning interval; for very hard water pre-treatment is recommended.
Yes. Evaporation absorbs heat, so a fogging system also reduces room temperature — which is why many farms specify it for both.
Full specifications on each product page.
Fine water mist for humidity control in sheds, greenhouses and workshops
View detailsSend us the area, the application and your country. You will get a written quotation — pump unit, nozzle count, controls and spare parts listed separately.